What it costs · Western Sydney

What glass really costs in Western Sydney, honestly.

A made-to-measure pane in Western Sydney runs from about $180, safety glass to AS 1288 more, and a shower screen more again. Here are the real price bands, what pushes a quote up its range, and how to read a glass quote so a cheap "from" price cannot catch you out.

Get an indicative price Call (02) 8000 0000

Indicative price

Get a ballpark in under a minute.

Tell us the job, the glass and where it sits for a guide range. Every pane is measured on site and the price fixed per pane in writing before we order, with no callout-fee surprise.

Price your glass

A guide range in under a minute. Every pane is measured on site and the price fixed per pane in writing before we order, with no callout-fee surprise.

What needs doing?How big is the glass?What glass does it need?Where is the glass?Anything with it?

Indicative supply-and-install range

A "from" price that fits ordinary float glass where the Standard calls for safety glass is the warning sign, and the cheapest stock panel is rarely the one cut for your opening.

Why the spread? A small float pane on the ground floor and a laminated shopfront panel craned into place are both "glass", but they are not the same job. The on-site measure pins your exact, fixed price.

What a real glass quote should name:

The glass spec the opening calls for, Ordinary float, toughened safety glass, laminated, or a double-glazed unit are different prices by name. Where the glass is in a door, a full-height side panel, a low window or a wet area, AS 1288 requires Grade A safety glass, and we spec it, never quietly fit cheaper float.
The size of the pane, A small window pane and a large sliding-door or shopfront panel use very different amounts of glass and more hands to lift and fit. Size is measured on site and named in the quote.
Single glass, or a sealed double-glazed unit, A foggy double-glazed window means a sealed unit made to size, not a single pane. The unit is made to order, so it costs more than a like-for-like single pane, and saves on heating and noise.
Access and the floor it is on, A ground-floor window reached off a ladder is one job. A second-storey opening, a shopfront over a footpath, or glass craned into place is another. Access is measured and named, never a surprise.
Emergency and after-hours work, A same-day board-up and an after-hours call-out carry a clear, named charge. We tell you the figure on the phone before we come, and we never spring a callout fee on the quote afterwards.

Read the cost guide

Ask your glazier:

?Is this glass toughened or laminated to AS 1288 where the opening needs safety glass?
?Is the price fixed per pane in writing before you order, or a "from" price?
?Is there a separate callout or after-hours fee, and what is it?

And what the guarantee actually covers:

Layer 01

Lifetime workmanship guarantee

The glazing install, guaranteed in writing for as long as you own the home. If a seal we fitted fails or a pane we installed is faulty, we come back and put it right.

Layer 02

Glass and unit manufacturer warranties, registered

Toughened and laminated glass and double-glazed units carry their maker warranties, commonly 7 to 10 years on a sealed unit. We register them to you at handover.

Layer 03

Statutory (ACL)

Services rendered with due care and skill for a reasonable period under Australian Consumer Law. Always applies.

How the guarantee works

The glass standard and insurance:

Why AS 1288 safety glass matters

Get this quoted properly

A guide range only. Every pane is measured on site and the price fixed per pane in writing before we order.

We do not store your numbers. This runs entirely in your browser.

Why quotes differ

What moves the price.

The glass spec the opening calls for

Ordinary float, toughened safety glass, laminated, or a double-glazed unit are different prices by name. Where the glass is in a door, a full-height side panel, a low window or a wet area, AS 1288 requires Grade A safety glass, and we spec it, never quietly fit cheaper float.
The size of the pane

A small window pane and a large sliding-door or shopfront panel use very different amounts of glass and more hands to lift and fit. Size is measured on site and named in the quote.
Single glass, or a sealed double-glazed unit

A foggy double-glazed window means a sealed unit made to size, not a single pane. The unit is made to order, so it costs more than a like-for-like single pane, and saves on heating and noise.
Access and the floor it is on

A ground-floor window reached off a ladder is one job. A second-storey opening, a shopfront over a footpath, or glass craned into place is another. Access is measured and named, never a surprise.
Emergency and after-hours work

A same-day board-up and an after-hours call-out carry a clear, named charge. We tell you the figure on the phone before we come, and we never spring a callout fee on the quote afterwards.

Indicative ranges

Typical price bands.

Indicative only. Every job is quoted on a walkthrough.

The cheap stock-panel fit

A "from" price for an off-the-shelf panel forced into an opening it was never cut for, often ordinary float where safety glass is required.

$120 "from"

Single window pane, made to measure

A standard pane measured and cut to size, supplied and fitted.

$180 to $450 per pane

Toughened or laminated safety glass

Grade A safety glass to AS 1288 for doors, low windows and wet areas.

$320 to $750 per pane

Glass splashback

Toughened, coloured or printed, measured and installed.

$450 to $1,200

Frameless shower screen

Made-to-measure 10mm toughened, supplied and installed.

$900 to $2,200

Cost questions

What people ask about price.

What does it cost to replace a single window pane in Western Sydney?

A standard window pane made to measure runs about $180 to $450 fitted, depending on the size and the glass it needs. Step up to toughened or laminated safety glass to AS 1288, which doors and low windows require, and a pane is about $320 to $750. We measure the opening on site and fix the price per pane in writing before we order, so the figure does not move after.

Why is a glass splashback or shower screen so much more than a window pane?

Both are larger, made-to-measure jobs in toughened safety glass, with more on-site templating and hardware. A glass splashback is about $450 to $1,200 templated around your cooktop and power points, and a frameless shower screen is about $900 to $2,200 in 10mm toughened glass, measured after the tiling so it seals cleanly. They cost more because they are made to fit your space exactly, not trimmed from a stock sheet.

How do I tell an honest glass quote from a cheap "from" price?

An honest quote names the glass grade, toughened or laminated to AS 1288 where the opening needs it, fixes the price per pane in writing before any glass is ordered, and names any board-up or after-hours charge up front. A "from $120" price is the warning sign: it usually fits an off-the-shelf panel where safety glass belongs, then grows once the job is booked. Ask for the grade and the fixed per-pane price before you pay a deposit.

Get started

Get an itemised, fixed price per pane across Western Sydney.

Tell us what is broken and send a photo. We give you a price, board up the opening the same day, then make the new glass to measure and fit it on a named day.

✓ AGWA member✓ Glazed to AS 1288✓ Licensed & insured✓ 86 five-star reviews✓ Lifetime workmanship guarantee